Product Manual

Page 14 of 41
Power Up
Turn Sofia 2 on using the power switch located on the rear panel (Figure 2).
Figure 2
Sofia 2 will display the Power On Progress screen and complete a Power On Self-Test. Once
the Power On is complete, Sofia 2 will display the Run Test screen (Figure 3) and it is ready
for use.
Figure 3
When turning on Sofia 2 for the first time, a Calibration Check will be required (Figure 4). A
Calibration Check must be performed before using it for the first time. The default
Supervisor ID (1234) will be used for the Calibration Check.
Battery Compartment
Power Port
RJ45
USB Ports (2)
Power Switch