Product Manual

Page 4 of 4
FOR INFORMATIONAL USE ONLY

FOR INFORMATIONAL USE ONLY
Not to be used for performing assay. Refer to most current package insert accompanying your test kit.
iFOB Control Set
EXPECTED VALUES
The QuickVue iFOB Control Set will produce examples of the color response to be expected
for negative and positive specimens when tested with the QuickVue iFOB test.
The failure to obtain a negative result with the Negative Control or a positive result with
the Positive Control indicates that the test was not performed properly or that the test
reagents were not functioning properly.
If an inappropriate result is obtained for either the Negative or Positive Control, either
repeat the test or contact Quidel Technical Support.
ASSISTANCE
If you have any questions regarding the use of this product, please call Quidel’s
Technical Support number, [phone] (toll-free in the U.S.A.) or [phone],
Monday through Friday, between 7:00 a.m. and 5:00 p.m. Pacic Time, U.S.A. If outside
the United States, contact your local distributor or [e-mail].
Quidel Corporation
Worldwide Headquarters
10165 McKellar Court
San Diego, CA 92121 USA
www.quidel.com
Temperature Limit
1114801 (12/05)
R
Manufacturer
For In Vitro Diagnostic Use
IVD
20197 - QuickVue iFOB External Control Set
REF
IVD