Product Manual

Page 8 of 12

FOR INFORMATIONAL USE ONLY



FOR INFORMATIONAL USE ONLY

Not to be used for performing assay. Refer to most current package insert accompanying your test kit.

QuickVue iFOB TEST

Place six (6) drops

in center of well

INTERPRETATION OF RESULTS

Refer to the Procedure Card or printed tray for visual color interpretation of the Test and

Control Lines. Both the T-line and the C-line present as the same burgundy color.

Positive Result:

If both a C-line and a T-line are present, the result is positive. A positive

result indicates the level of hHb in the specimen is at or above the

detection level.

Negative Result:

If only the C-line develops in the control region of the test strip, the

result is negative.

Invalid Result:

If no C-line appears within 5 minutes, the result is invalid and

the assay should be repeated with a new device. NOTE: The test

line may or may not be present. However, the absence of a control

line indicates an invalid test.

IMPORTANT: Do not read the test results after ten (10) minutes.

 Q UICK LY snap off tip.

 DO NOT TWIST.

 Holding the Collection Tube vertically, dispense

six (6) drops of specimen solution from the

Collection Tube into the center of the Sample

Well.

 READ RESULTS AT 5–10 MINUTES.

Some positive results may be seen earlier.

iFOB

Squeeze Here

SNAP AWAY