Product Manual

Page 4 of 12

FOR INFORMATIONAL USE ONLY



FOR INFORMATIONAL USE ONLY

Not to be used for performing assay. Refer to most current package insert accompanying your test kit.

QuickVue iFOB TEST

SPECIMEN COLLECTION AND STORAGE

The specimen used in this assay is feces. In most cases, the patient will collect the

specimen at home. In the event that the specimen is collected at the physician’s office

or lab, the patient will follow the procedure outlined below.

1. Enter the Patient Identification information on the Collection Tube label.

NOTE: Do not allow fecal specimen to contact toilet water until after the sample has been

collected. Do not urinate on fecal specimen or Collection Paper.

2. Attach Collection Paper to toilet seat.

a. Raise toilet cover and seat.

b. Remove tape cover from each end of the Collection Paper.

c. Position Collection Paper on rear half of toilet bowl, allowing paper

to sag.

d. Press the tape down on each side of the toilet bowl.

e. Deposit fecal specimen on Collection Paper.

f. Do not remove the Collection Paper from the

toilet bowl.

3. Unscrew the Sampler from the

Collection Tube.

Unscrew

Sampler

Assembled

Collection Tube

with Buffer

Sampler