Product Manual

Page 7 of 124QuickVue RSV Test

FOR INFORMATIONAL USE ONLY



FOR INFORMATIONAL USE ONLY

Not to be used for performing assay. Refer to most current package insert accompanying your test kit.

Nasopharyngeal Swab Test Procedure

1. Just before testing, add Extraction Reagent to the test tube up to

the fill line (250 µL).

Note: Too little or too much of the Extraction Reagent may cause

erroneous results.

2. Immediately add the patient swab sample to the tube. Squeeze the

bottom of the tube so the swab head is compressed. Rotate the

swab a minimum of five (5) times to obtain optimal results.

Keep swab in the tube for

one (1) to two (2) minutes.

3. Express all liquid from the swab head by squeezing the tube as the

swab is removed. Discard the swab.

4. Place the Test Strip into the tube with the arrows

pointing down. Do not handle or remove the

Test Strip for fifteen (15) minutes.

5. Remove the Test Strip, and read result according to the Interpretation

of Results section. Some positive results may appear sooner than

15 minutes.

Fill to Line