Product Manual

Page 2 of 6hCG Control Set
FOR INFORMATIONAL USE ONLY

FOR INFORMATIONAL USE ONLY
Not to be used for performing assay. Refer to most current package insert accompanying your test kit.
reagents and materIals sUpplIed
 One (1) vial (4.5 mL) hCG Negative Control: Contains buffered solution, with
0.1% sodium azide as a preservative.
 One (1) vial (4.5 mL) hCG Positive Control: Contains hCG in a buffered solution,
with 0.1% sodium azide as a preservative.
warnIngs and precaUtIons
 For In Vitro Diagnostic Use.
 DO NOT use beyond the labeled expiration date marked on the outer kit label.
 DO NOT interchange the caps of any reagent bottles.
 Dispose of containers and unused contents in accordance with Federal, State, and
local requirements.
 Controls contain sodium azide which may react with lead and copper plumbing to
form highly explosive metal azides. On disposal, flush with a large volume of water
to prevent azide buildup.
 The Controls are designed for use only with QuickVue+ One-Step hCG Combo,
QuickVue One-Step hCG Urine or Combo, or RapidVue hCG Test kits.
HANDLE THESE REAGENTS AS IF THEY WERE POTENTIALLY INFECTIOUS.
kIt storage and stabIlIty
Store the hCG Control Set at room temperature 15–30°C (59–86°F). Do Not Freeze.
QUalIty control
External controls may be used to verify that all reagents and procedures are performing
properly. The hCG Control Set, when used in accordance with the test procedures
described in the QuickVue+ One-Step hCG Combo, QuickVue One-Step hCG Urine or
Combo, or RapidVue hCG Test kits, provides this capability.
Quality control testing should be performed in accordance with the directions
accompanying the QuickVue+ One-Step hCG Combo, QuickVue One-Step hCG Urine or
Combo, or RapidVue hCG Test.