SDS

Page 4 of 8
SAFETY DATA SHEET‐QUICKSILVER HIGH PERFORMANCE GEAR
LUBE
6.3.1. Keep unnecessary personnel away. Do not touch damaged containers or spilled material unless wearing
appropriate protective clothing. Keep people away from and upwind of spill/leak. Keep upwind. Keep out
of low areas. Ventilate closed spaces before entering them.
6.3.2. Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Wash thoroughly after handling.
6.3.3. Avoid contaminating soil or releasing this material into sewage and drainage systems and bodies of water.
7. HANDLING AND STORAGE
7.1. Handling
7.1.1. Empty containers retain product residue (solid, liquid, and/or vapor) and can be dangerous. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static
electricity, or other sources of ignition. They may explode and cause injury or death. Empty containers
should be completely drained, properly closed, and promptly returned to a drum reconditioner or
disposed of properly.
7.2. Storage
7.2.1. Keep container closed when not in use. Do not store with strong oxidizing agents. Do not store at
elevated temperatures.
7.2.2. Keep away from heat, sparks and open flame. Store in a well‐ventilated place. Keep container tightly
closed. Keep away from food, drink and animal feedingstuffs. Keep out of the reach of children. Use care in
handling/storage
8. EXPOSURE CONTROLS/ PERSONAL
PROTECTION
8.1. Exposure Limit:
8.1.1. US. OSHA Table Z‐1 Limits for Air Contaminants (29 CFR 1910.100)
Components
Type
Value
Form
Antimony, Tris(dipentylcarbamodithioat o) (CAS
15890‐25‐2)
PEL
0.5 mg/m3
Distillates (petroleum), Hydrotreated Heavy
Naphthenic (CAS 64742‐52‐5)
PEL
5 mg/m3
Mist
2000 mg/m3
500 ppm
8.1.2. ACGIH
Components
Type
Value
Form
Distillates (petroleum), Hydrotreated Heavy
Naphthenic (CAS 64742‐52‐5)
TWA
5 mg/m3
Inhalable Fraction