SDS

SAFETY DATA SHEET-QUICKSILVER PREMIUM GEAR OIL
Page 5 of 10
storing product in direct sunlight for extended periods of time. Storage area must meet OSHA
requirements and applicable fire codes. Consult appropriate federal, state and local authorities before
reusing, reconditioning, reclaiming, recycling or disposing of empty containers or waste residues of this
product.
8. EXPOSURE CONTROLS/ PERSONAL
PROTECTION
8.1. Engineering Controls:
8.1.1. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of mists
and/or vapors below the recommended exposure limits (see below). An eye wash station and safety
shower should be located near the work-station.
8.2. Personal Protective Equipment:
8.2.1. Personal protective equipment should be selected based upon the conditions under which this material is
used. A hazard assessment of the work area for PPE requirements should be conducted by a qualified
professional pursuant to OSHA regulations. The following pictograms represent the minimum
requirements for personal protective equipment. For certain operations, additional PPE may be required.
8.3. Eye Protection:
8.3.1. Safety glasses equipped with side shields are recommended as minimum protection in industrial settings.
Wear goggles if splashing or spraying is anticipated. Wear goggles and face shield if material is heated
above 125°F (51°C). Have suitable eye wash water available.
8.4. Hand Protection:
8.4.1. None required for incidental contact. Use gloves constructed of chemical resistant materials such as
heavy nitrile rubber if frequent or prolonged contact is expected. Use heat-protective gloves when
handling product at elevated temperatures.
8.5. Body Protection:
8.5.1. Use clean protective clothing if splashing or spraying conditions are present. Protective clothing may
include long-sleeve outer garment, apron, or lab coat. If significant contact occurs, remove oil-
contaminated clothing as soon as possible and promptly shower. Launder contaminated clothing before
reuse or discard. Wear heat protective boots and protective clothing when handling material at elevated
temperatures.