SDS

Page 5 of 8
SAFETY DATA SHEET – QUICKSILVER PREMIUM TCW‐3 2‐CYCLE ENGINE
OIL
8.2. Engineering Controls:
8.2.1. Ventilate as needed to comply with exposure limit
8.3. Eye Protection:
8.3.1. Use goggles/face shield to avoid eye contact
8.4. Glove Protection:
8.4.1. Use impervious gloves to avoid repeated/prolonged skin contact.
8.5. Work/Hygienic Practices:
8.5.1. If clothing becomes contaminated, change to fresh clean clothing. Do not wear until thoroughly
laundered.
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1. Appearance/Odor: Blue colored liquid with
mild hydrocarbon odor.
9.2. Odor Threshold: No data available
9.3. pH: No data available 9.4. Boiling Point: Wide range
9.5. Melting Point: No data available 9.6. Solubility (H₂0): Negligible
9.7. Specific Gravity: 0.8633 @ 15.6°C 9.8. Density: 7.198 lbs/gal
9.9. Octanol/H₂0 Coeff.: No data available 9.10. Evaporation Rate (BUAC=1): <1
9.11. Molecular Weight: No data available 9.12. Decomposition Temp: No data available
9.13. Auto Ignition: No data available 9.14. Lower Flammability Limit: No data available
9.15. Flash Point: 162°F (72°C) 9.16. Upper Flammability Limit: No data available
9.17. Vapor Density (Air=1): >1 9.18. Vapor Pressure: <1mmHg @ 20°C
9.19. VOC: 235g/L 9.20. Flammability Class: Category 4
9.21. Viscosity @ 40°C 34cSt (34 mm²/s) 9.22. Viscosity @ 100°C 6.0cSt (6.0 mm²/s)
10.STABILITY AND REACTIVITY
10.1. Reactivity:
10.1.1. Material does not pose a significant reactivity hazard.
10.2. Chemical Stability: