SDS

Page 4 of 8
SAFETY DATA SHEET – QUICKSILVER PREMIUM TCW‐3 2‐CYCLE ENGINE
OIL
6. ACCIDENTAL RELEASE MEASURES
6.1. Spill Procedures:
6.1.1. Remove ignition sources. Recover Liquid. Add absorbent to spill area. Ventilate confined spaces. Advise
authorities if product enters sewers, etc.
6.2. Waste Disposal:
6.2.1. Assure conformity with applicable disposal regulations. Dispose of absorbed material at approved waste
site
6.3. Precautionary Measures:
6.3.1. Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Wash thoroughly after handling.
6.3.2. Avoid contaminating soil or releasing this material into sewage and drainage systems and bodies of water.
7. HANDLING AND STORAGE
7.1. HANDLING
7.1.1.
Empty containers retain product residue (solid, liquid, and/or vapor) and can be dangerous. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static
electricity, or other sources of ignition. They may explode and cause injury or death. Empty containers
should be completely drained, properly closed, and promptly returned to a drum re‐conditioner or
disposed of properly.
7.2. STORAGE
7.2.1.
Keep container closed when not in use. Do not store with strong oxidizing agents. Do not store at
elevated temperatures.
8. EXPOSURE CONTROLS/ PERSONAL
PROTECTION
8.1. Component Exposure Limits:
8.1.1. Distillates (petroleum), solvent‐refined heavy paraffinic
8.1.1.1. ACGIH TLV: 5mg/m³ (oil mist) TWA
8.1.1.2. OSHA PEL: 5mg/m³ (oil mist) TWA
8.1.2. Petroleum distillates, hydrotreated light
8.1.2.1. ACGIH TLV: 5mg/m³ (oil mist) TWA
8.1.2.2. OSHA PEL: 5mg/m³ (oil mist) TWA
8.1.3. Long chain alkyl polyamide
8.1.3.1. Not‐available