Instructions / Assembly

97
BRIDGING, BRACING & BACKING CONNECTIONS
CLIPS AND CONNECTORS
The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12
clarkdietrich.com
Danback
®
WOOD BACKING PLATE
Just snap, flex and screw. It’s that fast.
Danback
®
is a heavy-duty,
flexible wood backing system
used to support cabinets, shelves,
handrails, wall-mounted sinks
and counters, and all other wall-
mounted fixtures. Danback provides
superior connection shear and
pullout strength to support and
meet even some of the heaviest
loading conditions. The patented
hinge design actually flexes around
the stud and snaps into place for a
perfect fit—every time.
Product
code
Width
(in)
Length
(in)
Packaging
Pcs./Skid
D16F*
5-1/8 48 250
D24F*
D16C**
D24C**
•
Reduces installation time up to 90%
•
Available for 16" and 24" o.c. framing
•
Eliminates cutting, notching, ripping and routing
•
Made with Dricon
®
fire-retardant treated wood
•
Complies with all national building codes
Dricon
®
is a registered trademark of Arch Wood Protection, Inc.
Danback
®
is a registered trademark of Daniel W. Tollenaar.
U.S. Patent No. 6,705,056 of Daniel W. Tollenaar.
*F = fire-treated plywood. D16 = 16" o.c. spacing. D24 = 24" o.c. spacing.
Trimables available for o-module spacing in small bucket or bulk quantities.
** FSC-certified lumber available on request, which can contribute to LEED
®
points on
your project. Contact ClarkDietrich LEED professionals at 888-437-3244 for more
information. FSC chain-of-custody # BV-COC-008121.
Katz™ BLOCKING
ClarkDietrich Katz™ blocking
is specifically manufactured to
ladder frame between parallel
framing members and provide for
the attachment of the top of the
interior nonstructural walls when
trusses or floor joists run parallel to
the walls. Katz blocks are secured to
the floor joists or roof trusses with
screws or nails.
Product code Size (in)
Length (in)
KA
3-5/8
16
24
FastBack™ BACKING CLIP
For use with the FastBack™ backing
system, the FastBack backing clip
conceals fasteners on the face of
the product. Rotate the FastBack
clip over the flange of the stud until
it sits flush. Then fasten into place
using drywall screws in the pre-
drilled holes.
Product code Width (in) Length (in) Packaging Pcs./Carton
FBBC 1-1/4 5-1/8 100
FBBC 1-1/4 10-1/4 100
U.S. Patent No. 7,882,676 is owned by Jeery Thomas Ellis.