Instructions / Assembly
89
CURTAIN WALL ANd BYPASS CONNECTIONS
CLIPS AND CONNECTORS
The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12
clarkdietrich.com
Flat Tail Slide Clip™
ClarkDietrich’s Flat Tail Slide Clip™
is used to attach exterior curtain
wall studs to the building structure,
providing for 2-1/4" vertical building
movement independent of the cold-
formed steel framing. It provides
variable stando, eliminating the
need for shims or additional framing
components. Restricts lateral
movement, but enables the curtain
wall system to move vertically.
Product code
Thickness
Stud width (in)
Packaging
Pcs./Bucket
Gauge Mils
Design thickness
(in)
FTSC 10 118 0.1242 3-5/8–8 25
Includes 80 FastClip deflection screws per bucket.
QuickClip™
QuickClip™ vertical slide clips
attach exterior curtain wall studs to
the building structure and provide
for vertical building movement
independent of the cold-formed
steel framing. Provide variable
stando and eliminate the need
for shims or additional framing
components. Simply rotate into
place and fasten to the floor/
ceiling beam. The clips restrict
lateral movement, but enable the
structure to move vertically.
Product
code
Thickness
Stud width
(in)
Packaging
Pcs./Bucket
Gauge Mils
Design thickness
(in)
QC3 10
118 0.1242 3-5/8 50
QC4 10 118 0.1242 4 50
QC6 10 118 0.1242 6 50
QC8 10 118 0.1242 8 40
U.S. Patent No. 5,836,133 of B&D Industries, Inc.
Slide Clip™
A ClarkDietrich Slide Clip™ is
used to attach exterior curtain
wall studs to the building structure
and provide for vertical building
movement independent of the
cold-formed steel framing. Slide
clips are used in bypass framing
situations and are normally
welded or otherwise fastened to
the vertical leg of a structural
angle at the floor or roof edge.
Product
code
Thickness
Size
(in)
Packaging
Pcs./Carton
Gauge Mils
Design thickness
(in)
SD 14
68 0.0713 2-3/8x5
50
SD 12 97 0.1017 2-3/8x5