Instructions / Assembly

The technical content of this literature is eective 5/31/12 and supersedes all previous information. The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12
clarkdietrich.com
83
VENEER PLASTER BEADS AND TRIMS
METAL LATH & ACCESSORIES
#4 SHORT FLANGE CORNER BEAD
For use on straight corners, or one
flange can be snipped then bent
without kinking. For use on arched
radius.
Product code
Length
(ft)
#4 8
#4 10
Available West Coast only.
WIRE CORNER REINFORCEMENT
A welded wire right angle assembly,
aording a truer, stronger exterior
corner that reduces cracking in
Portland cement plaster.
Bullnose, Stockaid and Archaid are
also available in stock 10' lengths.
Product code
Size
Flange
(in)
Length
(ft)
W951 2-1/2 x 2-1/2 10
Available West Coast only.
TILE CAP
Preferred method where sink
or lavatory is to be recessed. A
punched metal strip attached to
the front edge of the cabinet is
used in some geographical areas
as a screed and support for the
countertop trim.
Product code
Length
(ft)
TC127 5
TZ154 5