Instructions / Assembly

The technical content of this literature is eective 5/31/12 and supersedes all previous information.Pub. No. CD-Full Line 5/12
clarkdietrich.com
82
VENEER PLASTER BEADS AND TRIMS
Mini-Bead™ 800 AND 900
ClarkDietrich Mini-Bead™ 800
and 900 are fine-mesh corner
beads used to provide corner
reinforcement for one- and
two-coat veneer plaster systems.
Mini-Bead 800 has 1/16" grounds
for one-coat veneer plaster and 90
keys per linear foot for excellent
bonding and strong corners. Mini-
Bead 900 has 3/32" grounds for
two-coat veneer plaster systems.
Product code
Grounds
(in)
Size
Width
(in)
Length
(ft)
MB80
(galvanized)
1/16 1-1/4
8
MB90
(galvanized)
3/32 1-1/4 10
ZB80
(zinc)
1/16 1-1/4 10
ZB90
(zinc)
3/32 1-1/4 10
Note: Zinc Mini-Beads should be used in exterior finish systems.
#701A METAL JTRIM WITH 3/32" AND 1/16" GROUNDS
ClarkDietrich veneer trims are
J-shaped to fit standard gypsum
panel depths with grounds to
accommodate veneer finishes. They
provide clean, neat edge protection
for one- or two-coat veneer
plaster finishes at gypsum panel
terminations to wall openings and
wall or ceiling intersections. Trim
with 3/32" grounds is for two-coat
veneers and trim with 1/16" grounds
is for one-coat veneer plaster.
Our zinc alternatives provide
ultimate corrosion protection
for cement board and exterior
applications.
Product code
Grounds
(in)
Size
Width
(in)
Length
(ft)
M71A
(galvanized)
3/32
1/2
8
10
5/8
8
10
M81A
(galvanized)
1/16
1/2
8
10
5/8
8
10
Z71A
(zinc)
3/32
1/2 10
5/8 10
Z81A
(zinc)
1/16
1/2 10
5/8 10
#701B METAL LTRIM WITH 3/32" AND 1/16" GROUNDS
Our veneer trims are L-shaped
trims designed for use at junctions
of veneer gypsum base with rough
concrete or masonry ceilings. Sized
to fit standard gypsum plaster
bases, the trim with 3/32" grounds
is for two-coat veneer, and the trim
with 1/16" grounds is for one-coat
veneer plaster.
Our zinc alternatives provide the
added benefit of ultimate corrosion
protection for exterior applications.
Product code
Grounds
(in)
Size
Width
(in)
Length
(ft)
M71B
(galvanized)
3/32
1/2
8
10
5/8
8
10
M81B
(galvanized)
1/16
1/2
8
10
5/8
8
10
Z71B
(zinc)
3/32
1/2 10
5/8 10
Z81B
(zinc)
1/16
1/2 10
5/8 10