Instructions / Assembly

ManualsBrandsQUICKSILVER ManualsBuilding materials1-1/4 in. x 8 ft. Galvanized Shiny Metal Corner Bead Job-Pack (25-Piece)

The technical content of this literature is eective 5/31/12 and supersedes all previous information. The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12

clarkdietrich.com

WEEP and SILL SCREEdS

METAL LATH & ACCESSORIES

31/2" JWEEP HIGHBACK PLASTER STOP

J-weep high-back plaster stop

is a J-shaped square-nosed trim

manufactured from 26 gauge

galvanized steel. Punched weep

holes allow for use as a sill weep

screed or screed and trim around

wall openings. Squared bends

accommodate 1" rigid insulation and

3/8" one-coat stucco applications.

Meets the IBC requirements for

foundation weep screeds.

Product

code

Size

Weep hole

Grounds

(in)

Depth

(in)

Length

(ft)

JWP

7/8 3-1/2 10

Yes

1-3/8 3-1/2 10

CAUTION: Joints and corners are a potential point of water intrusion. ClarkDietrich

strongly recommends building paper be placed as ﬂashing behind all joints and corners.

Also, a bead of high-quality caulking should be applied under the joints prior to the

attachment of the materials.