Instructions / Assembly

72
METAL LATH
The technical content of this literature is eective 5/31/12 and supersedes all previous information.Pub. No. CD-Full Line 5/12
clarkdietrich.com
GALVANIZED Junior™ MESH LATH
ClarkDietrich Junior™ diamond
mesh lath is used as a substrate
for gypsum plaster or for Portland
cement plaster stucco on either
interior or exterior walls, ceilings,
sot and fascia surfaces, and
can be used under ceramic tile in
wall, ceiling and floor applications.
It’s useful in all general-purpose
applications and is the best lath
available for ornamental work and
contoured surfaces.
Product code
Weight
(lbs/yard
2
)
Size
Width
(in)
Length
(in)
LAM
(O)
1.75
27 97
2.5
3.4
O = Paper is oset 1" on one long edge and end to ensure proper lath-to-lath laps and a
minimum 2" paper overhang on the opposing long edge and end.
Note: Asphalt paper-backed lath is available in a variety of osets for various applications
requiring a moisture barrier. Paper conforms to Federal Specification UU-B-790A; type
grade D, style 2 and type 1, grade B, style 1a.
SELFFURRING DIMPLED LATH
ClarkDietrich self-furring
dimpled lath is manufactured with
approximately 1/4" deep dimples
that raise diamond mesh away from
solid surfaces to enable thorough
plaster or stucco penetration
into and behind the lath for
superior mechanical bonding. The
dimples are spaced every 1-1/2"
over the rectangular sheet, with
approximately 11,000 keys per
square yard. Fasteners must be
applied within the dimple cavity,
to maintain designed furring
characteristics.
Product code
Weight
(lbs/yard
2
)
Size
Width
(in)
Length
(in)
LAD
(O)
1.75
27 97
2.5
3.4
O = Paper is oset 1" on one long edge and end to ensure proper lath-to-lath laps and a
minimum 2" paper overhang on the opposing long edge and end.
Note: Asphalt paper-backed lath is available for various applications requiring a
moisture barrier.
SELFFURRING VGROOVE MESH LATH
ClarkDietrich self-furring v-groove
mesh lath is manufactured with
five, approximately 1/4" deep “V”
ribs along the length of the sheet.
The Vs allow thorough penetration
into and behind the lath for
superior mechanical bonding. Use
over solid surfaces like concrete,
cement board, column fireproofing,
masonry, sheathing and to replaster
over old surfaces.
Product code
Weight
(lbs/yard
2
)
Size
Width
(in)
Length
(in)
LAV
(O)
1.75
27 97
2.5
3.4
O = Paper is oset 1" on one long edge and end to ensure proper lath-to-lath laps and a
minimum 2" paper overhang on the opposing long edge and end.
Note: Asphalt paper-backed lath is available for various applications requiring a
moisture barrier.