Instructions / Assembly

69
VINYL BEADS AND TRIMS
INTERIOR FINISHING
The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12
clarkdietrich.com
VINYL LSTOP BEAD
ClarkDietrich L-stop bead creates
a clean detail at gypsum panel
terminations into doors, windows
and ceilings. Easily attaches with
nails, screws or staples to studs
through bead flange. Multiple
perforations along 1-1/4" flange
and raised shoulder enhance strong
compound adhesion and provide
for a flush finish. Rustproof,
dent-resistant and easy to field
cut without distorting profile or
leaving sharp edges and burrs.
Product code
Size
Width (in)
Length (ft)
VLLS
1/2
8
10
5/8
8
10
VINYL Rip Bead™ LT R I M
ClarkDietrich Vinyl Rip Bead™
L-trim produces an exceptional
finish at intersection of gypsum
panels to ceiling grid, window
returns and dissimilar wall types.
A tear-away strip provides a
protective edge and guide for
drywall finishing knives. Once joint
compound is applied, finished and
painted, remove the tear-away
strip to form a crisp, clean edge.
Product code
Size
Width (in)
Length (ft)
VLZL
1/2
8
10
5/8
8
10
VINYL PARTITION END CAP FOR 1/2" OR 5/8" BOARD
Vinyl partition end caps quickly
finish doorways, knee walls and
wall ends, providing a finished face.
Designed with a special factory
punched “T” slotted flange, they
can be easily cut to form arches
or curves. Instead of installing two
corner beads, you install a single
piece, using less compound. Easy to
cut, rustproof and dent-resistant.
Product code
Size
Width (in)
Length (ft)
PEC50
(1/2")
2-1/2
10
3-5/8
PEC58
(5/8")
2-1/2
10
3-5/8