Instructions / Assembly

63
metal BeaDS anD tRImS
INTERIOR FINISHING
The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12
clarkdietrich.com
BULLNOSE TO 90˚ TRANSITION CAP
ClarkDietrich bullnose corners
to 90˚ transition caps simplify
installation of baseboard or crown
molding corners into 3/4" bullnose
systems. Quick and easy to install,
this product eliminates corner gaps
and the need for time-consuming
caulking and filling. Use with metal
or vinyl 3/4" bullnose corner bead
for transition onto baseboard or
crown molding up to 4-1/2" wide.
Product code
Style
Radius (in)
Packaging
Pcs./Box Cartons/Skid
M859
Bullnose to 90˚
transition cap
3/4
50 25
M E TA L J T R I M
ClarkDietrich metal J-trim is a
strong, reveal-type galvanized
steel casing that provides
maximum corrosion protection
and neat finished edges to drywall
terminations around door and
window openings. It also delivers
a clean trim line at intersections
or where gypsum panels abut
dissimilar surfaces, such as columns
and window mullions. Hemmed
edges allow quick installation and
do not require joint compound.
Product
code
Size
Width (in) Length (ft)
M400
3/8
8
10
M401 1/2
8
10
M402 5/8
8
10
METAL UTRIM/SPACKLE J
ClarkDietrich U-trim, or Spackle
J, provides maximum protection
and clean finished edges on gypsum
panels around door and window
openings, and when wallboard
abuts dissimilar surfaces, such as
suspended ceilings, beams, plaster,
masonry and concrete. It’s easily
installed by sliding trim over the
edge of the board and nailing/
screwing through the knurled
(long) flange—which also enhances
compound adhesion.
Product
code
Size
Width (in) Length (ft)
M20A
1/2
8
10
5/8
8
10