Instructions / Assembly

The technical content of this literature is eective 5/31/12 and supersedes all previous information.Pub. No. CD-Full Line 5/12
clarkdietrich.com
58
PAPER-FACED BEADS AnD TRIMS
PAPERFACED 3/4" BULLNOSE OUTSIDE CORNER, TAPEON BEAD
Goldline
®
3/4" tape-on bullnose
corner bead is used to create
a smooth, rounded look to
standard drywall corners. It adds
contemporary styling and a sense of
openness to any room. Apply in the
same manner as all other tape-on
beads. Gypsum boards must be
cut back 3/4" to accommodate the
bullnose and ensure a flush fit.
Product
code
USG
reference
Style
Dimensions (in)
Standard
length (ft)
A B C
P1BO SLOC
Standard 7/8 3/4 7/8 8,10
PAPERFACED 3/4" BULLNOSE OFFANGLE OUTSIDE CORNER, TAPEON BOARD
Goldline o-angle bullnose tape-
on bead (also known as splayed
bullnose or 120/135˚ bullnose corner
bead), is used to provide a rounded,
bullnose finish for o-angle drywall
intersections. It is applied in the
same manner as 90˚ paper bead.
Gypsum board must be cut back
3/4" to accommodate the bullnose
and ensure a flush fit.
Product
code
USG
reference
Style
Dimensions (in)
Standard
length (ft)
A B C
P0BO SLOCOS
Off-Angle 1 3/4 1 8,10
PAPERFACED 3/4" BULLNOSE OUTSIDE CORNER, NAILON BEAD
Goldline 3/4" nail-on bullnose
corner bead is used to create
a smooth, rounded look to
standard drywall corners. Nail-
on bullnose adds contemporary
styling and a sense of openness
to any room. Nails or mechanical
fasteners are used to secure
the bead to the wallboard.
Product
code
USG
reference
Style
Dimensions (in)
Standard
length (ft)
A B C
P1BN SLOCN
Standard 5/8 3/4 5/8 8,10
PAPERFACED 3/4" BULLNOSE OFFSET OUTSIDE CORNER, NAILON BEAD
Goldline o-angle nail-on bullnose
bead, also known as splayed bullnose
or 120˚/135˚ bullnose corner bead, is
used to provide a rounded bullnose
finish for outside o-angle drywall
intersections. Nails or mechanical
fasteners are used to secure the
bead to the wallboard.
Product
code
USG
reference
Style
Dimensions (in)
Standard
length (ft)
A B C
P00B SLOCNOS
Off-Angle 5/8 3/4 5/8 8,10