Instructions / Assembly

The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12
clarkdietrich.com
57
PAPER-FACED BEADS AnD TRIMS
INTERIOR FINISHING
PAPERFACED METAL OUTSIDE CORNER, TAPEON BEAD
Goldline
®
superior 90° outside
corner drywall finishing tape-on
bead virtually eliminates corner
cracks, edge chips and nail pops.
Applied using joint compound, the
beads don't require mechanical
fasteners. Helps reduce labor
and material costs by reducing
the amount of joint compound
needed, and also eliminating one
pass of finishing.
Product
code
USG
reference
Style
Dimensions (in)
Standard
length (ft)
A B C D
P1WO B1W
StandardLeg 1/2 3/4 7/8 7/8
8,10
P1UO B1EL EqualLeg 3/4 3/4 3/4 3/4
P1XW B1XW ExtraWide 7/8 5/8 5/8 3/4
P1XU B1XWEL ExtraWideEqual 7/8 7/8 5/8 5/8
P1SU B1SuperWide SuperWideEqual 1-1/8 1-1/8 5/8 5/8
Other lengths are available.
PAPERFACED METAL OFFANGLE CORNER, TAPEON BEAD
Goldline o-angle tape-on bead,
also known as splayed or 120/135˚
corner bead, is used to provide a
strong, smooth finish for outside
o-angle drywall intersections.
Applied in the same manner as 90˚
paper bead, the result is a clean,
crisp, durable o-angle corner that
will not crack or chip.
Product
code
USG
reference
Style
Dimensions (in)
Standard
length (ft)
A B C D
P100 B1OS
Off-Angle 1/2 3/4 5/8 5/8 8,10
Other lengths are available.
PAPERFACED INSIDE CORNER, TAPEON BEAD
Goldline tape-on inside 90˚ paper-
faced corner bead provides very
straight and precise inside corners.
The rigid, steel-reinforced inside
corners provide a durable guide to
achieve exceptionally straight and
sharp inside corners. Embed in joint
compound and press firmly into
place. Remove excess compound
with a drywall knife.
Product
code
USG
reference
Style
Dimensions (in)
Standard
length (ft)
A B C D
P2I B2
StandardAngle 3/8 3/8 5/8 5/8 8,10
PAPERFACED METAL OFFANGLE INSIDE CORNER, TAPEON BEAD
Goldline o-angle tape-on 120/135˚
inside (or reverse splayed) bead
is used to achieve a crisp, clean,
straight-finished inside o-angle
drywall finish. This bead can be
used for inside corner angles
between 120˚ and 135˚. As with all
tape-on beads, o-angle bead is
applied using joint compound. No
mechanical fasteners are required.
Product
code
USG
reference
Style
Dimensions (in)
Standard
length (ft)
A B C D
P20I B2OS
Off-Angle 5/8 5/8 5/8 5/8 8,10