Instructions / Assembly

The technical content of this literature is eective 5/31/12 and supersedes all previous information.Pub. No. CD-Full Line 5/12
clarkdietrich.com
HEADOFWALL DEFLECTION SYSTEMS
44
DEEP LEG DEFLECTION TRACK
This traditional assembly
accommodates the deflection of
floor beams or floor decks at the
head-of-wall. The single long leg
track assembly requires 1-1/2"
cold-rolled channel and 1-1/2" x
1-1/2" 16 gauge EasyClip™ clip
angles (U-Series™) installed
continuously throughout the
upper-most punchouts to align
the studs vertically within the
plane of the wall. Deflection track
details must be designed for the
specific conditions of a building
to accommodate the required
deflection and end reactions of the
studs. Deflection tracks cannot
be used in axial load-bearing stud
conditions or above continuous
window spandrels.
Product
code
Member
Thickness
Size
(in)
Gauge
Design thickness
(in)
TSC
362T200-33
20 0.0346
3-5/8
600T200-33 6
362T200-43
18 0.0451
3-5/8
600T200-43 6
362T200-54
16 0.0566
3-5/8
600T200-54 6
362T200-68
14 0.0713
3-5/8
600T200-68 6
362T200-97
12 0.1017
3-5/8
600T200-97 6
TSE
362T300-33
20 0.0346
3-5/8
600T300-33 6
362T300-43
18 0.0451
3-5/8
600T300-43 6
362T300-54
16 0.0566
3-5/8
600T300-54 6
362T300-68
14 0.0713
3-5/8
600T300-68 6
362T300-97
12 0.1017
3-5/8
600T300-97 6
Custom sizes available on request.
DoubleTrack™ OVERTRACK SYSTEM
ClarkDietrich DoubleTrack™
system is a two-piece assembly
that accommodates deflection of
exterior curtain walls. A custom-
made deep leg outer track is
installed to the underside of the
floor deck. A wall assembly is
constructed on the floor and slid
into place, with a “gap” at the top for
deflection. DoubleTrack deflection
assemblies cannot be used in axial
load-bearing stud conditions or
above continuous window spandrels.
Product
code*
Thickness
Web width
(in)
Leg length
(in)
Standard
length (ft)
Gauge Mils
Design
thickness (in)
OTSC
20 33 0.0346
3-3/4
2 10
6-1/8
18 43 0.0451
3-3/4
6-1/8
16 54 0.0566
3-7/8
6-1/4
14 68 0.0713
3-7/8
6-1/4
12 97 0.1017
3-7/8
6-1/4
OTSE
20 33 0.0346
3-3/4
3 10
6-1/8
18 43 0.0451
3-3/4
6-1/8
16 54 0.0566
3-7/8
6-1/4
14 68 0.0713
3-7/8
6-1/4
12 97 0.1017
3-7/8
6-1/4
*C = 2" legs; E = 3" legs.
Custom sizes available on request.