Instructions / Assembly

EXTERIOR FRAMING
The technical content of this literature is eective 5/31/12 and supersedes all previous information. Pub. No. CD-Full Line 5/12
clarkdietrich.com
DOOR AND WINDOW FRAMING
39
RedHeader R O J A M B
As part of the RedHeader RO
system, the jamb eliminates capped
members, allowing drywall screws
to drive through only one thickness
of material. Plus, the open jamb
does not require pre-insulating.
RedHeader RO Extra-Duty jambs
have a longer 3-1/2" flange for
wider spans.
Standard jambs
Product code
Thickness
ksi Depth (in) Flange (in) Return (in)
Gauge Mils
Design
thickness
(in)
JAMB
18 43 0.0451 33
3-5/8
3 7/8
4
6
8
16 54 0.0566 50
3-5/8
3 7/8
4
6
8
14 68 0.0713 50
3-5/8
3 7/8
4
6
8
12 97 0.1017 50
3-5/8
3 7/8
4
6
8
All material CP60.
Extra-Duty jambs
Product code
Thickness
ksi Depth (in) Flange (in) Return (in)
Gauge Mils
Design
thickness
(in)
JAMB
16 54 0.0566 50
3-5/8
3-1/2 7/8
4
6
8
14 68 0.0713 50
3-5/8
3-1/2 7/8
4
6
8
12 97 0.1017 50
3-5/8
3-1/2 7/8
4
6
8
All material CP60.
RedHeader RO Drop ’N Lock™ CLIP
Prepunched slots allow for vertical
field adjustments before fully
attaching the clip to the RedHeader
RO jamb stud. The narrower header
and clip width reduce material
buildup that pushes the gypsum
board out, eliminating additional
corner bead and taping costs.
Product code
Thickness
ksi
Depth (in) Height (in)
Pcs./Box
Gauge Mils
Design
thickness
(in)
DNLC683
14 68 0.0713 50
3-5/8 3 24
DNLC684 4 3 24
DNLC686 6 3 24
DNLC688 8 3 16
All material G90.
One RedHeader RO jamb stud
(1) RedHeader RO jamb stud:
No track or screws required
to build up sections
Replaces
Typical jamb with:
(2) 1-5/8" flange studs & (1) track
w/ (4) screws at 16" o.c.