MSDS

829351 - Quicksilver Quickstor Fuel Stabilizer
Issue Date: 03-Oct-2017
Page 5
Status: FINAL
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Suggestions provided in this section for exposure control and specific types of protective equipment are based on readily
available information. Users should consult with the specific manufacturer to confirm the performance of their protective
equipment. Specific situations may require consultation with industrial hygiene, safety, or engineering professionals.
SECTION 9: Physical and chemical properties
Note: Unless otherwise stated, values are determined at 20°C (68°F) and 760 mm Hg (1 atm). Data represent typical values and are not intended
to be specifications.
Appearance: clear Flash Point: 127 °F / 53 °C
Physical Form: Liquid Test Method: Pensky-Martens Closed Cup (PMCC), ASTM D93, EPA 1010
Odor: Petroleum Initial Boiling Point/Range: No data
Odor Threshold: No data Vapor Pressure: No data
pH: Not applicable Partition Coefficient (n-octanol/water) (Kow): No data
Vapor Density (air=1): >1 Melting/Freezing Point: No data Upper
Explosive Limits (vol % in air): No data Auto-ignition Temperature: No data
Lower Explosive Limits (vol % in air): No data Decomposition Temperature: No data
Evaporation Rate (nBuAc=1): No data Specific Gravity (water=1): 0.8021 @ 60ºF (15.6ºC)
Particle Size: Not applicable Bulk Density: No data Percent
Volatile: No data Viscosity: 20mm²/s @ 40°C
Flammability (solid, gas): Not applicable Solubility in Water: Negligible
SECTION 10: Stability and reactivity
Reactivity: Not chemically reactive.
Chemical stability: Stable under normal ambient and anticipated conditions of use.
Possibility of hazardous reactions: Hazardous reactions not anticipated.
Conditions to avoid: Extended exposure to high temperatures can cause decomposition. Avoid high temperatures and all
sources of ignition. Prevent vapor accumulation.
Incompatible materials: Avoid contact with strong oxidizing agents and strong reducing agents.
Hazardous decomposition products: Not anticipated under normal conditions of use.
SECTION 11: Toxicological information
Information on Toxicological Effects
Substance / Mixture
Acute Toxicity
Hazard
Additional Information
LC50/LD50 Data
Inhalation
Unlikely to be harmful
>5 mg/L (mist, estimated)
Dermal
Unlikely to be harmful
> 2 g/kg (estimated)
Oral
Unlikely to be harmful
> 5 g/kg (estimated)
Aspiration Hazard: May be fatal if swallowed and enters airways
Skin Corrosion/Irritation: Causes skin irritation. Repeated exposure may cause skin dryness or cracking.
Serious Eye Damage/Irritation: Causes mild eye irritation.
Skin Sensitization: No information available on the mixture, however none of the components have been classified for skin
sensitization (or are below the concentration threshold for classification).
Respiratory Sensitization: No information available.
Specific Target Organ Toxicity (Single Exposure): May cause drowsiness and dizziness.
Specific Target Organ Toxicity (Repeated Exposure): No information available on the mixture, however none of the