Product Manual

Plow Cart
® patent pending
Remove snow plows faster and easier using the Quick Mount FITS FISHER MINUTE MOUNT 2 TYPE PLOWS
Plow Cart by All-Type Welding and Fabrication, Inc.
USER INSTRUCTIONS FOR QUICK MOUNT PLOW CART
STEP 1
STEP 2
Framework.
Blade Channel.
STEP 3
SAFETY NOTES
STEP 4 1. Maximum Load Capacity 1080 lbs.
Install Plow on Truck from Quick Mount Plow Cart 2. To avoid possible injury, keep all body parts clear of
blade channel when releasing plow onto the plow cart.
Roll Plow up to truck. Align into the plow mounts. Push light tower towards the truck to 3. Never attempt to lift A-frame up beyond jack max. lift
align pins. Using built in handle engage connecting pins. height, this can cause plow to become unbalanced
raise stand. Connect electrical plugs. Lift Plow off cart and pull Quick Mount Plow Cart out and possibly flip over.
from under plow. Plow is now easily installed to truck and ready for use. 4. Always lock rear caster when storing a plow on the
plow cart.
web: www.quickmountplowcart.com
from truck. Plow is now stored on the Quick Mount Plow Cart.
disconnect electrical plugs. Pull jack lock lever and lower stand until it makes contact with
Adjustable Foot Plate . Release built in handle to disengage connecting pins and pull away
stand. Set the distance so the plow blade is close to center or towards the rear of the
Load Plow onto Quick Mount Plow Cart
Lower plow onto the Quick Mount Plow Cart, using the instructions for removing a
Fisher Minute Mount 2 plow,
Adjust Quick Mount Plow Cart to specific Plow Manufacturer's
Before rolling the Quick Mount Plow Cart under the plows A-frame, bolt the adjustable
foot plate to the cart, using the (2) 5/16'' bolts, fasten the adjustable foot plate to the
Support Tube using the two (2) holes that best align adjustable foot plate to the jack
QUICK MOUNT
Pre-load Plow to mount on Quick Mount Plow Cart.
Attach plow to truck using Fisher Minute Mount 2 system. Straighten plow blade so side
hydraulic cylinders are equal.
QMB-CH Fisher - 09/02