Instructions / Assembly
Table Of Contents
- QuickJack Manual
- Table of Contents
- Introduction
- Shipping
- Safety
- Components
- Accessories
- Specifications
- Frequently Asked Questions
- Setup Checklist
- Setup
- Setup Safety Rules
- Tools
- Selecting a Site
- Unpacking
- Clearances
- QuickJack Assembly Kit
- Air and Hydraulic Cylinders
- Installing the Hydraulic Elbow Fittings
- Preparing the Short Hydraulic Hoses
- About Quick-Connect Fittings
- Routing the Short Hydraulic Hoses
- Preparing and Connecting the Long Hydraulic Hoses
- Pressurizing the Air Cylinders
- Find a Location for the Power Unit
- Installing the Hydraulic Fittings on the Power Unit
- Connect the Power Unit to a Power Source
- Filling the Hydraulic Fluid Reservoir on the Power Unit
- Check the Breather Valve
- Connect the Hydraulic Hoses
- Bleeding the Hydraulic Cylinders
- Final Checklist Before Operation
- Test the QuickJack
- Leave the Manual with the Owner/Operator
- Operation
- Maintenance
- Troubleshooting
- Wiring Diagrams
- Labels
- Parts Sheets
- Automotive Lift Institute (ALI) Store
- Maintenance Log
- CE Documentation
QuickJack™ Portable Car Jack 10 P/N 5900959 — Rev. J3 — Oct. 2019
Accessories
SUV and Light Truck Adapter Kit
The optional SUV and Light Truck Adapter Kit increases the service capability of your QuickJack by
providing stackable Lift Blocks that mount inside the Receiver Trays.
The Adapter Kit is available for Models BL-5000SLX/EXT and BL-7000SLX/EXT.
The Adapter Kit includes:
• Four low-profile, round Contact Pads
• Four Bases that accommodate the Contact Pads and the Extenders
• Four 3-inch Extenders that raise the Contact Pads
Visit the Accessories page of the QuickJack website for more information.
SLX Frame Extension Kit
The SLX Frame Extension Kit is a pair of QuickJack frame extenders that increase the lift-point spread
for BL-5000SLX and BL-7000SLX models by 6 inches, for a total lift point spread of 66 inches.
They fit snugly into your QuickJack with no setup required and can be easily taken off and put back
on, depending on what Vehicle you are raising.
Visit the Accessories page of the QuickJack website for more information.
Motorcycle Lift Adapter Kit
The Motorcycle Lift Adapter Kit lets you add a platform on top of your QuickJack Frames, converting it
into a motorcycle lift. This product is not CE certified.
The Adapter Kit includes a tread plate, heavy-duty tie-down rings, a support axle, a large clamp with
treaded-rubber padding, and an easy-to-use crank for wheel security.
Visit the Accessories page of the QuickJack website for more information.
Ranger RML-1100 Motorcycle Jack
The Ranger RML-1100 Motorcycle Jack is ideal for servicing motorcycles and ATVs up to 1,100
pounds / 499 kg. It is the perfect accessory for the QuickJack Motorcycle Lift Adapter Kit. This
product is not CE certified.
Visit the Accessories page of the QuickJack website for more information.
JackPak
The portable JackPak lets you add air to the Air Cylinders on each QuickJack Frame. It also includes
additional features for roadside assistance and emergencies.
Refer to jackpak.com for more information.