Product Brochure
FITS BL-5000 AND BL-7000 SERIES
Some cars may have staggered or uneven lifting points, and
many trucks might have kicked frame rails, this can sometimes
make lifting your vehicle with a QuickJack challenging. The
Crossbeam Adapter Set can give your QuickJack some of
the capabilities of a two-post lift by allowing you to position
contact pads directly under even the most staggered lifting
points around. Though you can easily and safely lift your car
with your QuickJack placed sideways, it may obstruct your
undercarriage, which can make some maintenance dicult or
impossible to perform. The Crossbeam Adapter Set can reach
all of your recommended lifting points while leaving your
undercarriage completely free!
The Crossbeam Adapter Set ts securely in the lifting trays of
each QuickJack frame and has a rail for special contact pads to
slide along, making it simple to nd the correct lifting points on
any car or truck! The lower feet placed in the QuickJack trays
can also slide easily along the crossbeam, which allows you to
position your QuickJack frames as near or far as you want up
to its 65” length. The Crossbeam Adapter Set even adds 4.75”
clearance height, giving you a little extra room while you’re
working underneath.
This set comes with the crossbeam adapter, two easy-slide
adapter pads and two extended-length rear contact pads to
match the additional height of the crossbeam. With everything
you need to adapt your QuickJack to meet any situation, this
set will quickly become one of the most important accessories
in your garage!
• Reaches dicult lifting points front to rear
• Adjustable lifting pads
• Additional 4.75” clearance height
• Comes with custom contact pads
• Unobstructed undercarriage
• Fits BL-5000 and BL-7000 series models only
© 2020 QuickJack LLC. Designed and engineered at BendPak Inc. in Southern California.
QuickJack is protected by one or more patents in the United States, China, Europe, and other countries.
SPECIFICATIONS
Crossbeam length 65” (1,651 mm)
Crossbeam w/ adapter
height (BL-5000 Series)
4.75” (121 mm)
Crossbeam w/ adapter
height (BL-7000 Series)
5” (127 mm)
Crossbeam to pad 1.5” (38 mm)
Base pad dimensions 4.75” x 4.75” (121 x 121 mm)
Round pad diameter 5” (127 mm)
Crossbeam Adapter
WHAT’S INCLUDED
(1) Crossbeam weldment
(2) Sliding base pad assemblies
(2) Sliding lift pad assemblies
(2) Base height adapter assemblies
(2) Round lift pad adapter assemblies