Instructions / Assembly

Motorcycle and ATV/Motorcycle Lift Adapter Kits 4 P/N 5900054 —Rev. B — April 2019
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment
before you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition. Do not sign the bill of lading until
after you have inspected the shipment
.
If
any of the items listed on the bill of lading are missing or are damaged, do not accept the shipment
until the carrier makes a notation on the bill of lading that lists the missing and/or damaged goods.
If you discover missing or damaged goods
after you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this manual carefully before using your new product . Do not set up or operate the
product until you are familiar with all operating instructions and warnings. Do not allow anyone else to
operate the product until they are also familiar with all operating instructions and warnings.
General Safety Information
Please note the following:
• The product is a Motorcycle or ATV/Motorcycle Lift Adapter Kit. Use it only for its intended
purpose.
• The Lift Adapter Kit
requires a working QuickJack. Make sure to follow all QuickJack safety
requirements in addition to the safety requirements listed here.
• The product must only be operated by authorized personnel.
• Always wear appropriate protective clothing when using the product.
• Keep loads centered and balanced on the Platform.
• When the product is in use, keep all body parts away from it.
• Do not make any modifications to the product. If you make modifications to the product, you may
void your warranty and increase the chances that an accident could occur.
• Make sure all operators read and understand the Installation and Operation Manual. Keep the
manual near the device at all times.
• Make a visual inspection of the product before using it. Check for damage or missing parts. Do not
use the product if you find any of these issues. Instead, take it out of service, then contact an
authorized repair facility, your distributor, or QuickJack at support.quickjack.com or
[e-mail].