Instructions / Assembly

Motorcycle and ATV/Motorcycle Lift Adapter Kits 3 P/N 5900054 —Rev. B — April 2019
Table of Contents
Introduction 3 System Components 7
Shipping Information 4 Setup 9
Safety Considerations 4 Operation 10
Specifications 6 Maintenance 11
Introduction
This manual describes the:
• Motorcycle Lift Adapter Kit. Holds your motorcycle in place while you service or repair it.
Requires a working QuickJack. Not compatible with the BL-6000XLT model.
• ATV/Motorcycle Lift Adapter Kit. Holds your ATV or motorcycle in place while you service or
repair it. Platform is wider than the Motorcycle Lift Adapter Kit. Requires a working QuickJack. Not
compatible with the BL-6000XLT model.
Both Lift Adapter Kits support up to 1,000 lbs (453 kg).
If you want to perform wheel service, consider getting the Ranger RML-1100 Motorcycle Jack; more
information is available at quickjack.com/accessories.
More information about the full line of QuickJack products and accessories is available at
quickjack.com.
This manual is mandatory reading for all users of the QuickJack Lift Adapter Kits, including anyone
who sets up, operates, maintains, or repairs them.
⚠ DANGER Be very careful when setting up, operating, maintaining, or repairing your
equipment; failure to do so could result in property damage, product damage,
injury, or (in very rare cases) death. Make sure only authorized personnel operate
this equipment. All repairs must be performed by an authorized technician. Do not
make modifications to the unit; this voids the warranty and increases the chances
of injury or property damage. Make sure to read and follow the instructions on the
labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support for your product is available directly from your distributor or you can contact
QuickJack at support.quickjack.com or [e-mail]. You can also ask for
replacement parts (please have the serial number and model number of your unit available).