Instructions / Assembly

Motorcycle and ATV/Motorcycle Lift Adapter Kits 10 P/N 5900054 —Rev. B — April 2019
You can put the Lift Adapter Kit onto the QuickJack frames when the QuickJack frames are on the
ground or in the first locked position. If you are having trouble putting on the platform with the
QuickJack frames on the ground, try raising the frames to the first locked position. If you do put the
platform on with the QuickJack frames in the first locked position, make sure to lower them before
trying to put a vehicle on the platform.
⚠
WARNING
The platform must fit securely on the QuickJack frames . Do not use the
Lift Adapter Kit until the platform fits securely on the QuickJack frames; if it does
not, your load could become unstable and fall, potentially damaging your vehicle,
the platform, or people in the area.
• Connect the platform to the QuickJack frames. Push the rod through the holes in the
side of the platform and through the QuickJack frames.
Secure the rod at both ends .
Operation
To operate your Lift Adapter Kit:
1. Make sure the QuickJack frames are on the ground. If the QuickJack frames are raised,
you must move them to the ground so that the platform’s ramp is accessible.
2. Move a vehicle onto the platform. Make sure the vehicle is centered and balanced on the
platform.
3. Secure the vehicle using the clamp assembly. Turn the handle on the clamp assembly
until it is securely holding the vehicle. The clamp assembly is designed to securely hold your vehicle
in place without causing any damage.
4. Use the tie-down rings. The provided tie-down rings can be used, if desired, to further secure
the vehicle.
5. Make a visual inspection. Do not use the Lift Adapter Kit until you have made sure that all
components are in place and working correctly.
If something is not working correctly, contact an authorized repair facility, your distributor, or
QuickJack at support.quickjack.com or [e-mail].
⚠ WARNING Do not use the Lift Adapter Kit unless all components are in place and working
normally. To do otherwise endangers your vehicle, the platform, and any people in
the area.
6. Raise the QuickJack frames to the desired position. Make sure to secure the QuickJack
in one of its two locking positions.
7. Begin your service or repair. Your Lift Adapter Kit is ready to go.