Instructions / Assembly

QuickJack™ Portable Car Jack 41 P/N 5900263 — Rev. B1 — September 2021
15. After 3 to 4 seconds release Down.
Holding the Down button for those 3 to 4 extra seconds helps to relieve hydraulic pressure in the
system.
16. Visually check to make sure both QuickJack Frames are engaged on the same locking position.
The following graphic shows the Release Cam
not engaged on a locking position; do not leave
your Frames like this!
⚠ WARNING Before doing anything else (like starting work on the Vehicle or leaving the area),
visually confirm that both QuickJack Frames are on the same locking positions
and that all Lift Blocks are in contact with the factory-recommended Lifting Points
of the Vehicle.
You can work on your Vehicle once you have visually confirmed that both Frames are engaged on the
same locking position and that all Lift Blocks are in contact with the Vehicle at the factory-
recommended Lifting Points.
⚠ WARNING As an added safety precaution, you must always use auxiliary safety stands under
the Vehicle while elevated on both QuickJack Frames.