Instructions / Assembly

QuickJack™ Portable Car Jack 36 P/N 5900263 — Rev. B1 — September 2021
About Lift Blocks
When raising a Vehicle with your QuickJack, the Vehicle should not touch the QuickJack Frames.
Instead, they should touch the Lift Blocks that are sitting in the QuickJack’s Receiver Trays.
There are three types of Lift Blocks available:
• Medium/Tall. Four Medium and four Tall Lift Blocks are included with each QuickJack. You can
stack one Medium on one Tall, but no more than that; make sure they are centered under the
Lifting Points.
• Pinch Weld. Ideal for raising Vehicles by their pinch welds. Separate purchase.
• SUV and Light Truck Adapter. Each set includes four round Contact Pads, four Extenders,
and four Bases. Perfect for Vehicles with high ground clearance or non-standard Lifting Points.
Separate purchase.
⚠ CAUTION Do not raise a Vehicle on the QuickJack Frames; always use Lift Blocks, Pinch-
Weld Blocks, or SUV and Light Truck Adapters in the Receiver Trays. Raising a
Vehicle on the Frames could damage the Vehicle and/or damage the QuickJack.
Drawing not necessarily to scale. Not all components shown.