Instructions / Assembly

QuickJack™ Portable Car Jack 27 P/N 5900263 — Rev. B1 — September 2021
Connect the Power Unit to a Power Source
Your Power Unit must also be located near an appropriate power source.
Refer to the manufacturer’s information tag on your Power Unit for current and wattage information for
your specific unit.
Power Sources for VAC Power Units
If you are using a 110 or 220/240 VAC Power Unit with your QuickJack, connect it to an appropriate
power source.
110 VAC Power Unit
Drawing not necessarily to scale. Some Power Units may be slightly different.
220/240 VAC Power Unit
220 and 240 Power Units come with wiring for connection to a power source, but without a plug .
You will need to have a certified Electrician connect the wiring to a plug appropriate for your location.
⚠ DANGER All wiring must be performed by a licensed, certified Electrician in accordance with
local and national electrical codes. If wiring the plug is done incorrectly, you could
damage the QuickJack and/or cause serious injury.
Drawing not necessarily to scale. Some Power Units may be slightly different.
The wiring on the 220/240 VAC units uses the international wiring standard of Brown (hot), Blue
(neutral), and Green/Yellow (ground). In the United States, the corresponding wiring is Black (L1 hot),
Red (L2 hot), and Green or Green/Yellow (ground).