Instructions / Assembly

QuickJack™ Portable Car Jack 17 P/N 5900263 — Rev. B1 — September 2021
Unpacking
Open the boxes and arrange the QuickJack components where you will be setting them up.
The components needed to set up a QuickJack:
• Box 1. Includes the Left Frame.
• Box 2. Includes the Right Frame.
• Box 3. Includes the Power Unit (Voltage decided at time of purchase), Parts Bag, Hydraulic
Hoses, 4 Medium Lifting Blocks, and 4 Tall Lifting Blocks.
⚠ WARNING Your two QuickJack Frames are similar, but they are not interchangeable. Always
line up your Frames as parallel to each other as the Lifting Points will allow, with the
Lock Bars on the outside , as shown below.
⚠ CAUTION Be sure to route the Short Hydraulic Hoses under the QuickJack Frames. If they
are routed over the QuickJack Frames, the QuickJack will not work correctly and
the Hoses could be damaged.