Owner`s manual

18 Quickie SALSA
ENGLISH
5.8.3 Armpad Position Adjustment (Fig. 45 - 48)
1. Fine armpad position adjustments (one to two inches) are
possible by loosening the 4mm armpad adjustment bolts (E)
and sliding the armpad forward or backward as required.
Access to the rear adjustment bolt may require pivoting the
armpad
NOTE– If more than one to two inches of adjustment is required,
refer to chart below and continue to Number 3.
2. Retighten both adjustment bolts (E). (Use 10 N/m or 88.5 in/
lb of torque.)
3. For larger adjustments, remove both sets of armpad
adjustment bolts.
4. Slide both armpads to the next set of attachment holes
(refer to the chart). Retighten both sets of armpad adjustment
bolts. (Use 10 N/m or 88.5 in/lb of torque.)
5.9 Legrests
WARNING - Be aware of your environment to make sure you
Fig. 44
Fig. 45
Fig. 46
Fig. 47
Fig. 48