System information

HULA 31
Rev.1.0
6.11 Mechanical Seat Tilt
To set the seat tilt angle, (Fig.6.29):
0º is given by bolting lower hole on seat bracket •
directly to the interface
3º is given by fitting tilt bracket between interface •
and upper hole on seat bracket
6º is given by fitting tilt bracket between interface •
and lower hole on seat bracket.
6.12 Centre Of Gravity (COG).
The seat can be moved forwards and backwards to
accommodate different seat depths, (Fig.6.28).
Position X - Do not use•
Position 1 – for seat depths 16-18”•
Position 2 – for seat depth 19”•
Position 3 – for seat depth 20”•
Fig. 6.27
Fig. 6.26
6°
0°
3°
Fig. 6.29
Fig. 6.28
1
2
3
X