SDS

QuickGRASS

PRO/Erosion Control Blanket
Section 6 - ACCIDENTAL RELEASE MEASURES
Containment Procedures: Contain by any means necessary.
Clean-Up Procedures: Vacuum or sweep up material as necessary.
Evacuation Procedures: Keep unnecessary people out of area.
Special Instructions: Remove sources of ignition during cleanup.
Section 7 - HANDLING AND STORAGE
Procedures for Handling: Remove all sources of ignition when handling this product.
Recommended Storage Methods: Store in a cool, dry area away from moisture, excessive heat and sources of
ignition.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines:
A. General Product Information
Keep formation of dusts to a minimum.
B. Component Exposure Limits
Wood Dust, All Soft and Hard Woods. OSHA PEL: 5 mg/m
3
; OSHA STEL: 10 mg/m
3
Engineering Controls:
Use as necessary to avoid contact with ignition sources.
Personal Protective Equipment:
Eye/Face: Wear safety glasses, goggles, or other appropriate eye/face protection.
Skin: Normal work clothing and gloves are recommended.
Respiratory: When necessary, appropriate NIOSH/MSHA approved respiratory protection should be used.
General: None.
Section 9 - PHYSICAL & CHEMICAL PROPERTIES
Appearance: Wood fiber covered or encased with
plastic mesh
Odor: Mild
Physical State: Solid pH: N/A
Vapor Pressure: N/A Vapor Density: N/A
Boiling Point: N/A Freezing Point: N/A
3 | Page