User manual

Page 43 of 47
Catalog #91001, 91003, 91004, 91005, 91007, 91009
Rev. 9/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0282
Connector Pin Out : Circle Track / Road Racing and Advanced Systems
Sensor Connector Pin
Battery Minus
Fuel Pressure J6 1
Oil Pressure J7 1
Transmission Pressure J8 1
Brake/Nitrous Pressure J9 1
Shaft Speed 1 J5 1
Shaft Speed 2 J3 1
Note: 1
System Ground (J1 Pin5) is connected to the
following
Sensor Connector Pin
Fuel Pressure J6 3
Oil Pressure J7 3
Transmission Pressure J8 3
Brake/Nitrous Pressure J9 3
Note: 2
Sensor Power +5V (J1 Pin6) is connected to
the following
Sensor Connector Pin
Fuel Pressure J6 4
Oil Pressure J7 4
Transmission Pressure J8 4
Brake/Nitrous Pressure J9 4
Note: 3
Sensor Power +12V (J1 Pin21) is connected
to the following
Connector J1 Pin Function Connector Pin
Tx 1 Serial Data To PC to J2 J4 2
Rx 2 Serial Data From PC to J2 J4 3
Return 3 Serial Data Return J4 5
Battery 4 +12V System Power Battery Plus
Ground 5 Sysytem Ground Note 1
+5 V Out 6 Sensor Power, +5V Note 2
Channel 9 7 Accelerometer, (Long)
Channel 10 8 Accelerometer, (Lat)
Channel 11 9 Fuel Pressure J6 2
Channel 12 10 Oil Pressure J7 2
Channel 13 11 Transmission Pressure J8 2
Channel 14 12 Brake/Nitrous Pressure J9 2
Channel 15 13 Analog (Spare)
Channel 16 14 Battery Voltage Monitor
Channel 1 15 Engine RPM
Channel 2 16 Shaft speed 1 J5 2
Channel 3 17 Shaft speed 2 J3 2
Channel 4 18 Data Log On/Off
Channel 5 19 Digital input (Spare)
Channel 6 20 Digital input (Spare)
+12 V Out 21 Sensor Power, +12V Note 3
Digital Out 1 22 0 or +5V (Off or ON) (Spare)
Digital Out 2 23 0 or +5V (Off or ON) (Spare)
Gnd 1 Sensor ground Note 4
Channel 17 2 EGT 1 J10 2
Channel 18 3 EGT 2 J10 3
Channel 19 4 EGT 3 J10 4
Channel 20 5 EGT 4 J10 5
Channel 21 6 EGT 5 J11 2
Channel 22 7 EGT 6 J11 3
Channel 23 8 EGT 7 J11 4
Channel 24 9 EGT 8 J11 5
Channel 25 10 Oil Temperature J12 2
Channel 26 11 Coolant Temp. J12 3
Channel 27 12 Nitrous Temp. J12 4
Channel 28 13 Temp, Spare J12 5
+12 V Out 14 +12 V Sensor Power Note 5
+12 V Out 15 +12 V Sensor Power J12 6
+5 V Out 16 +5 V Sensor Power Note 6
+5 V Out 17 +5 V Sensor Power J12 1
Channel 29 18 Analog (Spare)
Channel 30 19 Analog (Spare)
Channel 31 20 Analog (Spare)
Channel 32 21 Analog (Spare)
Gnd 22 Sensor Ground J12 7
Gnd 23 Sensor Ground (Spare)
Sensor Connector Pin
Left Rear Susp. Travel J11 4
Right Rear Susp. Travel J12 4
Note: 4
Sensor Power +12V (J2 Pin14) is connected
to the following
Sensor Connector Pin
Left Rear Susp. Travel J11 3
Right Rear Susp. Travel J12 3
Note: 5
Sensor Power +5V (J2 Pin16) is connected
to the following
Sensor Connector Pin
Left Rear Susp. Travel J11 1
Right Rear Susp. Travel J12 1
Note: 6
Sensor Ground (J2 Pin22) is connected to
the following
J1J2
QwikData Connections (J1 and J2)