Specifications

Page 52 of 54
9.3.22. MOPS Pol A noise diode faulty
Message ID: 40
Triggers when: Pol A SDO is below 0.002 or above 1
This is indicative of the noise injection having failed.
9.3.23. MOPS Pol B noise diode faulty
Message ID: 41
Triggers when: Pol B SDO is below 0.002 or above 1
This is indicative of the noise injection having failed.
9.3.24. Sound is switched off
Message ID: 42
Triggers when: The sound is switched off on TOAD.
Note that the sound should never be switched off. If you encounter nuisance
warnings, please let staff know so that they can be addressed rather than
silencing an essential monitoring tool!
9.3.25. MAPS dataset RPC server down
Message ID: 43
Triggers when: The dataset queries fail due to an RPC timeout
This can be indicative of the RPC server on bigrock having failed
9.3.26. Monitoring data error
Message ID: 44
Triggers when: The webserver fails to deliver monitoring data
This can be indicative of the web server being down, connectivity problems
between the browser and the web server, as well as connectivity problems
between the web server and the monica server (bigrock).
10. Index of Figures
Figure 1 Focus positions at 86 GHz measured July 2012. Gaussian fit to data
suggests best focus position is at 16.2mm. .......................................................... 6!
Figure 2 Antenna efficiency at 12mm and 7mm ................................................... 7!
Figure 3 Tsys at 3mm from Ladd et al. ................................................................. 8!
Figure 4 MOPS bands and IF's........................................................................... 10!