User manual

ManualsBrandsQUICKCOOL ManualsRadio & Transmission PCBsNFC development kit Assembled 5 Vdc

Part of NFC Development Kit, CONRAD Best.-Nr. 001082694

NFC Manager

User Manual

The software NFC-Manager offer the possibility to write, read and format NFC-Tags very easily. Further

you can transfer data to a suitable Android mobile via a direct P2P (Peer to Peer) connection.

The NFC-Manager can write Tags in a way that the following actions are executed on your mobile

phone automatically:

 Choice of a certain URL (webpage)

 Display of a v-card

 Dial a phone number

 Send a SMS (short message service)

Summary of content (18 pages)

PAGE 1
NFC Manager User Manual The software NFC-Manager offer the possibility to write, read and format NFC-Tags very easily. Further you can transfer data to a suitable Android mobile via a direct P2P (Peer to Peer) connection. The NFC-Manager can write Tags in a way that the following actions are executed on your mobile phone automatically:  Choice of a certain URL (webpage)  Display of a v-card  Dial a phone number  Send a SMS (short message service) Part of NFC Development Kit, CONRAD Best.-Nr.
PAGE 2
NFC Manager User Manual CONTENTS 1. Introduction ................................................................................................................................................................................. 2 2. List of NFC Tag(IC Type) ...................................................................................................................................................... 3 3. NFC Tag Basics .............................................................................
PAGE 3
NFC Manager User Manual 2. List of NFC Tag(IC Type) List of NFC Tag(IC Type) supported by NFC Manager Program NXP Mifare Classic 1k NFC Forum Type 1 Innovision Topaz IRT5011 NFC Forum Type 2 NXP Mifare Ultralight Mifare Ultralight C NTAG203 INFINEON my-d NFC SLE 66R01P my-d NFC SLE 66R32P Kovio 2k (K14T1) NFC Forum Type 3 Sony FeliCa NFC Forum Type 4 NXP Mifare DESFire EV1 ISO/IEC 14443 standard series, full compliant cards 3. NFC Tag Basics NFC Manager Program reads and writes NDEF data onto a Tag.
PAGE 4
NFC Manager User Manual 4. NFC Manager NFC Manager Program finds automatically NFC Device (produced by DUALi only), when it is connected. Version : 2.
PAGE 5
NFC Manager User Manual 5. Tag Detect When a Tag is placed on NFC Device, it reads the information on the Tag. < Mifare Classic as NFC Type Tag Detect> Version : 2.
PAGE 6
NFC Manager User Manual 6. Tag Format When formatting a Tag, this program writes the data listed on the below table on Capability Container (or Attribute Information), and NDEF Data.
PAGE 7
NFC Manager User Manual 2. Place a Tag on the device 3. Following message will be show when Format is done  The below message will be shown when unsupported tag (Refer to 2. List of NFC Tag(IC Type)) is on the device 7. Tag Write NFC Manager Program provides 5 types of below record - TextRecord - UriRecord - SmartPosterRecord - VCardRecord(vCard) - AndroidApplicationRecord Version : 2.
PAGE 8
NFC Manager User Manual 7.1 Add Record Input TEXT you want to add and click add button  To delete text/url/Sp/vCard data, double click it from the log box Input URI / URL you want to add and click add button Version : 2.
PAGE 9
NFC Manager User Manual Input Smartposter data you want to add and click add button Input Bookmark you want to add and click add button Input Phone number you want to add and click add button Version : 2.
PAGE 10
NFC Manager User Manual Input message you want to add and click add button Input business card information you want to add and click add button Version : 2.
PAGE 11
NFC Manager User Manual 7.2 Write a Tag 1. After adding Record, click “Tag” on the lower- right hand side and “Write NDEF” 2. Place a Tag on the device. Version : 2.
PAGE 12
NFC Manager User Manual 3. This message will pop up when writing a Tag is succeeded 4. An error message will be shown in case of failure. Version : 2.
PAGE 13
NFC Manager User Manual 5. Following message will be shown when the size of NDEF Messages is bigger than Tag memory size. 8. Tag Read 1. Click “Tag” on the lower- right hand side and “Read NDEF” Version : 2.
PAGE 14
NFC Manager User Manual 2. Place a Tag on the device. 3. Following message will be show when you place a tag on [Read] windows. Version : 2.
PAGE 15
NFC Manager User Manual 9. P2P Write 1. According to “8.1 Add Record”, add Record. Click “P2P” on the lower- right hand side and “Write NDEF” 2. Place a NFC-enabled Android mobile on the device. Perhaps you have to confirm it on your smartphone. Version : 2.
PAGE 16
NFC Manager User Manual 3. This message will pop up when writing a Tag is succeeded. 4. An error message will be shown in case of failure. Version : 2.
PAGE 17
NFC Manager User Manual 10. P2P Read 1. Click “Tag” on the lower- right hand side and “Read NDEF” 2. Place a NFC-enabled Android mobile on the device. Version : 2.
PAGE 18
NFC Manager User Manual 3. Following message will be show when you place a tag on [Read] windows. 4. The below message will be shown when an NFC unsupportable mobile is on the device. Version : 2.