User manual

NFC Development Kit
Version: 1.0
3
Hardware Spezifikation:
Smart Card Interface
Kontaktlose Smart Cards (ISO 14443 A/B), MIFARE, FeliCa,
NFC Tag type 1,2,3,4
1 SIM slot für SAM Karten (ISO7816, T=0,T=1)
Schnittstelle
USB 2.0 Full Speed (12Mbps)
Kommunikationsprotokoll
PC/SC (Auslieferungszustand) oder Vendor (per
Firmwareupload änderbar)
CPU
ARM 32-bit Cortex-M3 (48MHz)
128Kbytes Flash, 20Kbytes SRAM
Baud Rate
106/212/424/848kbps
Bis zu 424kbps im NFC P2P Mode
Leseabstand
Max. 5cm (abhängig von der Transpondergröße)
Spannung
5V (USB)
Stromaufnahme
Typ. 100 mA, max. 250mA
Anschluss
USB Kabel
Größe
62 x 95 x 13 mm (BxLxH)
Anzeige
4 LED´s
Gehäusematerial
ABS
Antennenabgleich
Direct matching
Betriebstemperatur
-10~60 °C
Lagertemperatur
-20~80 °C