NFC- Development-Kit Manual Please note: This development kit is only for users with advanced knowledge of computer and programming. Only the tool “NFC-Manager” can be used easily. NFC Entwickler Kit, Conrad Best.-Nr.
NFC Development Kit Parts list: 1 pc. QDE-Dragon-U 1 CD-ROM NFC-Manager SDK with all tools, drivers, documents and samples 5 pc. TAG-NTAG-20-PVC-WH-AD-TOM, 20mm round NTAG 203 NFC tags 5 pc. CARD-DES-ISO-PVC, Desfire 4k ISO-Card 5 pc. KEYFOB-MF1K-03ABS-BU, Mifare 1k keyfob Dragon is contact-less Smartcard reader which supports14443 TYPE-A/B, Mifare series, Felica and NFC (ISO18092)protocol at the same type.
NFC Development Kit Hardware Specification Smart Card Interface Contactless Smart Card (ISO 14443 A/B), MIFARE, FeliCa, NFC Tag type 1,2,3,4 1 SIM slot for SAM Card (OPTION - ISO7816, T=0,T=1) Host Interface USB 2.
NFC Development Kit The block diagram of Dragon CPU Smart Card Socket SAM Socket (SAM1) (ST-ARM 32-bit Cortex-M3) PN512 RF IC 4 LEDs USB Connector Antenna Description of Function Installation: Please follow the Installation Driver Guide (CD-Rom-Folder: QUIO NFC Manager SDK/Install Driver) Tool NFC-Manager: Please start NFC-Manager.exe at the folder NFC-Manager All protocols and samples can be found on the CD-Rom. Note: At delivery status the reader works with CCID-Firmware.
