Datasheet

QUICK-OHM Küpper & Co. GmbH * Postfach 120465 * 42334 Wuppertal
Wuppertal, 06.04.09
Postanschrift: Hausanschrift Telefon: [phone] Handelsregister: Konten:
Postfach 12 04 65 Unterdahl 24 B Telefax: (02 02) 40 43 97 Amtsgericht Wuppertal HRB 4642 Deutsche Bank (BLZ 330 700 90) 5 144 019
D-42334 Wuppertal D-42349 Wuppertal-Cronenberg Telefax: (02 02) 40 43 50 Geschäftsführer: Klaus A. Küpper Postbank Essen (BLZ 360 100 43) 441 83-436
http://www.quick-ohm.de email: [e-mail] Id-Nr. DE 121099121 Stadtsparkasse Wuppertal (BLZ 330 500 00) 214312
Connections QC-PC-D
Display readout
The display of the TCV-DU shows the current temperature (TA) and the set point (TT). A small icon
shows if the device is configured for Heating or Cooling operation. This is controlled by the “mode”
setting. A animated icon indicates if the output is active. A red led right below the display is also in-
dicating if the output is active.
Change settings
- To enter the menu press and hold the UP and DOWN key for 3 seconds, a simple menu will show.
- Go through the settings with the UP or DOWN key.
- To change the selected setting press and hold the UP and DOWN key for 1 second, the setting gets
highlighted. Change the setting by pressing the UP or DOWN key. If the desired value is selected,
press and hold the UP and DOWN key for 1 second to save the current setting. The device will return
to the settings menu.
- To exit the menu press and hold the UP and DOWN key for 3 seconds.
Factory defaults
If factory default need to be loaded, press and hold the UP and DOWN key while powering up the
device. Release the keys after power-up. The device is now loaded with its factory default settings.
Ta 0
+ 0
Tt out