Datasheet

ManualsBrandsQUICKCOOL ManualsRadio & Transmission PCBsTransponder card ICD2 5 St PVC

Product data sheet Rev. 3.0 — 14 March 2007 18 of 33

NXP Semiconductors

SL2 ICS53/SL2 ICS54

I•CODE SLI-S/I•CODE SLI-S HC

PUBLIC

8.1.3.9 Destroy SLI-S

Command Code = B9h

With the Destroy SLI-S command the I•CODE SLI-S/I•CODE SLI-S HC Label IC can be

destroyed if the Destroy SLI-S password has been transmitted before. This command is

irreversible and the I•CODE

SLI-S/I•CODE SLI-S HC will never respond to any command

again (ISO and EPC commands).

Remark: The Destroy SLI-S can only be executed in addressed or selected mode.

Table 34. Request format

SOF Flags Destroy

SLI-S

IC Mfg

code

UID CRC16 EOF

8 bits 8 bits 8 bits 64 bits 16 bits

8 bits

Table 35. Response format when Error_flag is set

SOF Flags Error code CRC16 EOF

8 bits 8 bits 16 bits

Table 36. Response format when Error_flag is NOT set

SOF Flags CRC16 EOF

8 bits 16 bits

8.1.3.10 Enable privacy

Command Code = BAh

With the Enable Privacy command the I•CODE SLI-S/I•CODE SLI-S HC Label IC can be

set into the Privacy mode. The I•CODE

SLI-S/I•CODE SLI-S HC will not respond to any

command except Get Random Number and Set Password.

To get out of the Privacy Status the valid Privacy password has to be transmitted to the IC

with the Set Password command.

Table 37. Request format

SOF Flags Enable

Privacy