17667SS Installation Guide

5830 Las Positas Road, Livermore CA 94551 | 3948 Airway Drive, Rock Hill SC 29732
Phone: [phone] | Fax: [phone] | www.quickbolt.com
QuickBOLT is a division of Quickscrews International Corp.
6
1
2
4
5
6
RECOMMENDED MATERIALS
• Rafter locator
• Chalk or a crayon
• Drill with a 3/16” drill bit
• MFG approved sealant
• M6 deep socket hex driver
• 1/2” wrench
INSTALLATION INSTRUCTIONS
1. Locate the rafter and predrill the hole
2. Fill the predrilled hole with MFG approved sealant
3. Place a ring of sealant around the bottom of the
Microflashing® washer
4. Place the Microflashing® and drive the bolt until it compresses
5. Insert the L-Foot
6. Insert the nut and tighten until secure
INSTALL INSTRUCTIONS
3