Operating Guide

BGA2015 OPERATION MANUAL
Page4
6．Movable Motor: stepping motor
7．Size 640*540*410（mm）
8．Camera output signal is video signal
9．.The operation of Camera on PL and IR alternates according to the movement of PL’s telescopic arm.
Brightness of IR camera is controlled by keyboard of PL.
Net weight： 55kg
Packaging dimension： 835*715*870（mm）
Note: When purchasing the equipment, please indicate the working voltage.
5.2 Technical Parameters
TL：Melting temperature of solder
T1：Heat preservation starting temperature of reflow soldering
T2：Heat preservation ending temperature of reflow soldering
T3：Peak value temperature of soldering and de-soldering
T0：Valve temperature: The lowest temperature of Bottom Heater when Top Heater heats up. T0<TB
Tir：The set temperature of bottom heater
TB：The real-time temperature of bottom heater
TC：The real-time temperature of top heater
S1：Heating time rising from T1 to T2
S2：Heating time rising from T2 to T3
S3：Heat preservation time of T3
IR EA-H15 Rework System has ten working modes and its parameter can be changed according to
demand. The following eight data can be referred.
0． T1=120℃ S1=50s T2=140℃ S2=45s T3=195℃ S3=15s TL=183℃ TB=150℃
T0=100℃
1． T1=130℃ S1=40s T2=145℃ S2=45s T3=200℃ S3=15s TL=183℃ TB=160℃
T0=150℃
2． T1=140℃ S1=30s T2=150℃ S2=50s T3=200℃ S3=20s TL=183℃ TB=160℃
T0=155℃
3． T1=140℃ S1=40s T2=150℃ S2=50s T3=195℃ S3=25s TL=183℃ TB=165℃
T0=160℃
4． T1=160℃ S1=50s T2=180℃ S2=40s T3=230℃ S3=15s TL=217℃ TB=170℃
T0=150℃
5． T1=160℃ S1=40s T2=175℃ S2=50s T3=225℃ S3=20s TL=217℃ TB=180℃
T0=170℃
6． T1=170℃ S1=40s T2=185℃ S2=50s T3=228℃ S3=20s TL=217℃ TB=180℃
T0=180℃