Operating Guide

BGA2015 OPERATION MANUAL
Page3
Note: Top and bottom IR radiator will be very hot during working, so explosive and combustible object or
gas and solvent is strictly prohibited in working areas, also please don’ touch the hot housing parts
Note: The laser alignment device includes a secondary laser device, so don’t see the laser bean directly.
Note: When the system happens trouble and needs maintenance, it should be carried on by a experienced
and authorized technician or expert, or contact with service agent and factory.
The unit with dangerous voltage! The inexperienced work is dangerous for operators.
5. Specifications and Technical Parameters
5.1 Specifications
IR System:
1．General Power: 2400W（max）
2．Power of Bottom Heater: 400W*4=1600W （Infrared ceramic heating tube）
3．Power of Top Heater: 120W*6=720W （Infrared heating tube, wavelength2~8µm，
size:60*60mm）
4．Preheating Time of Bottom Heater: about90s，size:260*260mm
5．Top heater range size: 20~60mm
6．Heating time of Top Heater: about10s（room temperature~230℃）
7．Vacuum Pump: 12V/300mA, 0.05Mpa
8．Top cooling Fan: 24V/300mA 15CFM
9．Laser Alignment Tube: 5V/30mA 2pcs
10．LCD Display Screen: 65.7*23.5（mm） 16*2 character
11．Communication: Standard USB connector (Connect with PC）
12．Movable Motor : stepping motor
13．Movable Arm Range: 128mm
14．Infrared Temperature sensor : 0~300℃（Testing range）
15．Outside K Type Sensor 3pcs
16．Max PCB Size :
400mm*400mm
17．Fuse: 3pcs，20A（220V）
PL System:
1．Power: about 15W
2．Camera: 12V/300mA；
Magnification: 22×10 times
Horizontal resolution: 480 TV lines
PAL format (composite)
3．Vacuum Pump: 12V/600mA 0.05Mpa (max)
4．LED lighting: yellow LED below light blue LED up light（with adjustable brightness）
5．Movable Arm Range: 196mm