Operating Guide

BGA2015 OPERATION MANUAL

Page9

2. 2．If you want to modify the next working flow, operate as the following B item; If you don’t want to

modify, please press DOWN knob to browse the following parameter settings.

B. Modify working flow

For instance: Modify the working flow and make it become 1 flow.

rotate MENU Press MENU

Step① Step②

rotate MENU Press OK

Step③ Step④

1. When carry on the forth step (Step④)

if press “SET” key, you can browse and modify parameter of this

flow, shown as C-1 item.

2. After finishing modifying of working flow 1, if you want to modify the next working mode, operate as C

item shows; If you don’t want to modify it, yon can press DOWN knob to browse the next parameter

settings.

C. Modify working mode

For instance: Modify the working mode and make it in “desolder” mode.

rotate MENU

Press MENU

rotate MENU Press OK

password: ***

select: 0

password: ***

select: 0

password: ***

select: 0

password: ***

select: 1

password: ***

select: 1

password: ***

select: 1

type: s

older

select: 1

type: solder

select: 1

type: d

esolder