Operating Guide

BGA2015 OPERATION MANUAL
Page8
The initial password of system is “000”. At the same time, system also has the omnipotent password “159”. If
you forget the setting password, you can input “159” to make the password of system come back to initial
password “000”.
Note: If want to modify any parameter system, you must input password, otherwise, you can only browse them.
For instance: Input the initial password “000” of system.
Press MENU Press MENU
rotate MENU Press MENU
旋转
rotate MENU Press MENU
rotate MENU Press OK
After input password:
1. If you want to modify the password, return to above mode to input the new password. If password is
modified successfully, it will show:
TC:022˙C Tb:019˙C
ready for flow
_password: ***
select: 0
password: ***
select: 0
password: 0**
select: 0
password: 0**
select: 0
password: 00*
select: 0
password: 00*
select: 0
password: 000
select: 0
Saving Password !
Any key return ！
Saving Password!
Any key return