User Manual
EN
DP2 L 770
QUICK DP2_L 770 INSTALLATION AND USER’S MANUAL - REV000A
6
2 - Supply and equipment
2.0 - Standard supply and material included in the package
• Windlass (top+gearmotor)
• Reversing contactor box for DP2 L 770
• Base gasket
• Lever
• Installation and user’s manual, Warranty
• Drilling template
2.1 - Tools required for installation
• Drill with bit: Ø 9 mm (23/64”)
• Hole saw Ø 58 mm (2” 9/32) and Ø 120 mm (4” 23/32)
• Hex wrench: 10 mm and 13 mm
2.2 - Recommended Quick
®
accessories not included
• Controls for control board (mod. 800)
• Waterproof push-button panel (HRC 1002)
• Foot switch (900)
• Hydraulic-magnetic circuit breaker (WCB)
•Anchor chain counter (CHC 1102M - CHC 1202M)
•Control system via RRC radio (R02 - P02 - H02)
3 - Introduction
BEFORE USING THE PRODUCT, PLEASE READ THIS USER’S MANUAL CAREFULLY. IF IN DOUBT, PLEASE CONSULT YOUR QUICK® DEALER.
3.0 - Important notes
This manual features Warning and/or Caution symbols that are important for safety.
Please follow the instructions provided.
Warning symbol indicating
dangerous situations.
Caution symbol to prevent direct or
indirect damage to the product.
Thismanualprovidesboatmanufacturersandnauticalequipmentinstallerswithinstructionsonhowtoassemblethespecied
Quick®
product and operate it correctly.