User Manual

EN
DP2 L 770
QUICK DP2_L 770 INSTALLATION AND USER’S MANUAL - REV000A
5
1.0 - Model code
SERIES NAME
POWER
(W)
1.1 - Technical Data
MODELS DP2L 770
MODEL POWER 350W
Motor voltage 12V
Maximum instantaneous pull 350 kg (770 lb)
Maximum work load 84 kg (185 lb)
Work load 40 kg (88 lb)
Current consumption at work load
(1)
20 A
Maximum recovery speed
(2)
20 m/min
(67 ft/min)
Recovery speed at work load
(2)
17 m/min
(56 ft/min)
Minimum motor cable cross section
(3)
16 mm²
(AWG5)
Circuit breaker
(4)
40 A
Deck thickness
(5)
20 ÷ 40 mm (25/32” ÷ 1” 9/16)
Weight-model without drum 6,3 Kg (18,3 lb)
(1) After an initial period of use.
(2) Measurements taken with a gypsy for 6 mm chain
(3) Minimum recommended value for total length L= <20 m.
Determine the cable cross section according to the length of the wiring.
(4) Withspeciccircuitbreakerfordirectcurrent(DC)anddelayedcircuitbreaker(thermal-magneticorhydraulic-magnetic).
(5) On request, studs can be supplied for greater deck thicknesses.
(6) Only on request.
BARBOTIN (*) 6 mm 7 mm - 1/4”
Chain size
6mm 6mm 7 mm 7 mm 1/4” 1/4”
DIN 766 ISO DIN 766 ISO G4 BBB
Rope size
** 1/2” 1/2” 1/2”
(*) For gypsy codes, see the exploded drawing on page 12.
**) The values in the table refer to a three-strand polyester rope with a rope/chain splice manufactured with the “Quick®”
system.
BEFORE USING THE WINDLASS READ THESE INSTRUCTIONS CAREFULLY.
IF IN DOUBT, CONTACT YOUR NEAREST “QUICK
®
” DEALER.
QUICK
®
RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT
PRIOR NOTICE. IN CASE OF DISCORDANCE OR ERRORS IN TRANSLATION BETWEEN THE TRANSLATED VERSION AND THE ORIGINAL TEXT IN THE ITALIAN
LANGUAGE, REFERENCE WILL BE MADE TO THE ITALIAN TEXT.
1 - Information about the product
DP2 L 770 350 12
VOLTAGE
(V)
INSTANT SHOOT
(lb)